Search the VMware Knowledge Base (KB)
View by Article ID

Upgrading vCenter Server Appliance 5.0.x/5.1 to 5.5 (2058441)

  • 28 Ratings

Purpose

This article provides steps to upgrade vCenter Server Appliance from 5.0.x or 5.1 to 5.5.

Resolution



Notes
:
  • vCenter Server Appliance 5.0.1, 5.1.x, and 5.5 use PostgreSQL for the embedded database, instead of IBM DB2 that was used in vCenter Server Appliance 5.0. If you use the embedded database with the vCenter Server Appliance, when you upgrade to version 5.5, the embedded IBM DB2 database is migrated to a PostgreSQL database. The configuration state of your existing database is preserved and the schema is upgraded to be compatible with vCenter Server Appliance 5.5.
  • vCenter Server Appliance 5.5 embedded vPostgres database can now support as many as 100 vSphere ESXi hosts and 3,000 virtual machines.
Prerequisites
To upgrade vCenter Server Appliance from 5.0.x/5.1 to 5.5:
  1. Deploy the new version of the vCenter Server Appliance. For more information, see Downloading and deploying the vCenter Server Appliance 5.x (2007619).

    Note: The new appliance has a default network configuration and the VMware VirtualCenter Server service is not configured and is disabled. There is a known issue were the vCenter Server Appliance will not change the hostname when deployed. For more information, see VMware vCenter Server Appliance 5.5 sets a wrong hostname after deployment (2065275)

  2. Connect to both the old and new appliances in separate browser windows. For example, use a URL similar to https://ip_address_of_vCenter_VM:5480.
  3. In the new appliance, start the vCenter Server Setup wizard and accept the end user license agreement.
  4. In the Configure Options panel, select Upgrade from previous version and then click Next.
  5. Copy the key from the Import this key section into the source appliance field.
  6. If you are upgrading vCenter Server Appliance 5.0.x to 5.5:

    1. In the old vCenter Server Appliance 5.0, click the Appliance Upgrade tab.
    2. Select source for the appliance role and click Setrole.
    3. Click Establish Trust.
    4. Paste the local appliance key into the Remote appliance key field.
    5. Click Import remote key.
    6. Copy the local appliance key.
    7. In the new vCenter Server Appliance 5.5, paste the local appliance key into the Remote appliance key field and click Next.

  7. If you are upgrading vCenter Server Appliance 5.1 to 5.5:

    1. In the old vCenter Server Appliance 5.1, paste the key from Step 5 into the Upgrade key field.
    2. Click Import key and Stop vCenter Server.
    3. Copy the Upgrade key.
    4. In the new appliance, paste the Upgrade key to the Paste the source appliance key into the field below field and click Next.
    5. If there are issues detected with your SSL certificates, select the Replace the SSL certificates option. You are prompted for SSO password for user administrator@vsphere.local.

  8. In the new vCenter Server Appliance, click Next.

    Note: The new appliance shuts down the old appliance and assumes the network identity (IP address, hostname, and network configuration) of the old appliance after the transfer has completed. This process can take some time and the virtual machines may appear unresponsive during the transfer. If the old appliance was configured to use dynamic addressing, the new appliance also uses dynamic addressing. When the import completes, the new vCenter Server Appliance starts.

  9. Review the list of hosts managed by the source appliance and ensure that all hosts to be managed by the new appliance are selected.
  10. Review the pre-upgrade check of the source appliance hosts and correct any errors before proceeding.
  11. Confirm that you have taken a backup or snapshot of the source appliance and the external database and click Next.
  12. (Optional) To follow the upgrade process, open an SSH session to the new vCenter Server Appliance and run this command:

    tail -f /var/log/vmware/vami/upgrade.log

    Note: This also helps in identifying where the process has stopped, if there are any issues with the upgrade.

  13. When the upgrade completes, click Close. vCenter Server Appliance is now upgraded and the new appliance reboots.

See Also

Request a Product Feature

To request a new product feature or to provide feedback on a VMware product, please visit the Request a Product Feature page.

Feedback

  • 28 Ratings

Did this article help you?
This article resolved my issue.
This article did not resolve my issue.
This article helped but additional information was required to resolve my issue.

What can we do to improve this information? (4000 or fewer characters)




Please enter the Captcha code before clicking Submit.
  • 28 Ratings
Actions
KB: