[VMC on AWS] NSX Autonomous Edge deployment fails on vSphere 7
Article ID: 316708
Updated On:
Products
VMware Cloud on AWS
Issue/Introduction
This article provides information on how to deploy NSX Autonomous Edge on vSphere 7.
Symptoms:
NSX Autonomous Edge deployment fails on vSphere 7 with the error below.
The following required extra configurations in the OVF package are not allowed for the deployment: [sched.mem.pin]
Symptoms:
NSX Autonomous Edge deployment fails on vSphere 7 with the error below.
The following required extra configurations in the OVF package are not allowed for the deployment: [sched.mem.pin]
Resolution
This issue will be resolved in a future release.
Workaround:
1. Replace the line that sets "sched.mem.pin" with this:
2. Save the ovf file.
3. Select the 2 files below in the "Select an OVF template" menu.
Workaround:
"nsx-autonomous-edge-2.5.1.0.0.14991196.ovf" needs to be modified as below.
Note: please copy and rename the ovf file as a backup before you make a change.
1. Replace the line that sets "sched.mem.pin" with this:
<vmw:Config ovf:required="false" vmw:key="memoryReservationLockedToMax" vmw:value="true"/>
2. Save the ovf file.
3. Select the 2 files below in the "Select an OVF template" menu.
- nsx-autonomous-edge.vmdk
- nsx-autonomous-edge-2.5.1.0.0.14991196.ovf
- nsx-autonomous-edge-2.5.1.0.0.14991196.ovf
Feedback
Yes
No
Powered by
