• Eliminating the volume caching from within the guest operating system
• Measuring the performance of different I/O sizes
• Helping to identify where the storage performance issue is occurring

Setup and configuration required to perform the performance tests :

• VMFS volume setup
  
  
  • 1 Volume - 100 GB
    
    
  Virtual machine setup
  
  Note: When creating the virtual machine, the default vmx configuration is sufficient for the primary disk, virtual CPU, and memory. These values are listed here. The second disk must reside on the same 100 GB VMFS volume and must be in a RAW format inside the virtual machine.
  
  Windows 2003 32 Bit:
  
  • 1 vCPU
  • 256 MB Memory
  • 2 Virtual Disks
  
  SCSI0:0 - OS Disk - 8 GB NTFS
  SCSI1:0 - Data(Test) - 10GB RAW
  
  Note: Do not format the disk.
  
  Windows 7, Windows 8 32/64 Bit:
  
  
  • 1 vCPU
  • 2 GB Memory
  • 2 Virtual Disks
  
  SCSI0:0 - OS Disk - 32 GB NTFS
  SCSI1:0 - Data(Test) - 10 GB RAW
  
  Note: Do not format the disk.
  
  Windows Server 2008 / Windows Server 2008 R2 32 Bit:
  
  
  • 1 vCPU
  • 4 GB Memory
  • 2 Virtual Disks
  
  SCSI0:0 - OS Disk - 40 GB NTFS
  SCSI1:0 - Data(Test) - 10 GB RAW
  
  Note: Do not format the disk.
  
  Red Hat Enterprise:
  
  
  • 2.6 Kernel 32/64 Bit
  • 1 vCPU
  • 2 GB Memory
  • 2 Virtual Disks
  
  SCSI0:0 - OS Disk - 16 GB ext 3 or ext 4
  SCSI1:0 - Data(Test) - 10 GB RAW
  
  Note: Do not format the disk.
  
  Centos Server, Debian Server, Ubuntu Server (LTS):
  
  
  • 1 vCPU
  • 1 GB Memory
  • 2 Virtual Disks
  
  SCSI0:0 - OS Disk - 16 GB ext 3 or ext 4
  SCSI1:0 - Data(Test) - 10 GB RAW
  
  Note: Do not format the disk.
  

  • RDP access to the virtual machine through the network

• IOMeter load simulator
  
  To download IOMeter, click here.

• Extract the file from the 2019131_VMware_Storage_Test.zip file attached to this article and copy the extracted file to the virtual machine. IOMeter uses this file to perform the tests.
  
  Note: The attached zip file is not compatible with newer releases of IOMeter (e.g with version 1.1.0). Use the version linked above (version 2006.07.27) for best results.
  
  
• SSH/Putty with root access to the ESX/ESXi host

• I/O Analyzer
• VMware VMmark
• vRealize Operations

Note: vRealize Operations (formerly known as vCenter Operations Management Suite) and VMware VMmark is supported by VMware, whereas I/O Analyzer is not supported by VMware.

Running the test :

1. Launch the esxtop batch mode with this command:
   
   # esxtop –a –b -d 5 -n 700 > HOSTNAME.esxtop_perf.out
   
   
2. Launch IOMeter from within the virtual machine and ensure that the configuration file loads and the test starts.
3. After the test completes and the esxtop batch mode completes, generate a vm-support log bundle for the host.
4. Gather the esxtop batch mode output files.
5. Gather the IOMeter performance report from the virtual machine.
6. Upload all files to the VMware SFTP/FTP server. For more information, see Uploading diagnostic information to VMware (1008525).

• Windows Server 2008 Best Practices
• RHEL Best Practices
• Installing and Configuring Linux Guest Operating Systems