1. Log in to the ESX host's terminal directly, or by SSH.
   • For ESX hosts, press Alt+F1 in the console or your remote System Management Interface and log in as root. For more information, see Connecting to an ESX host using an SSH client (1019852).
   • For ESXi hosts, see Using Tech Support Mode in ESXi 4.1 and ESXi 5.x (1017910).
      
2. Identify the RDM file name for each shared storage used by the virtual machines in the MSCS cluster nodes.
   
   Note: This step requires that the virtual machine be powered off first. If you do not power off the virtual machine, you receive the error, Device or resource busy. This applies to all virtual machines accessing the LUN.
   
   #cd /vmfs/volumes/Clusters_datastore/node1
   #fgrep scsi1 *.vmx |grep fileName
   scsi1:0.fileName = "/vmfs/volumes/4d8008a2-9940968c-04df-001e4f1fbf2a/node1/quorum.vmdk"
   scsi1:1.fileName = "/vmfs/volumes/4d8008a2-9940968c-04df-001e4f1fbf2a/node1/data.vmdk"
   
   The last two lines of the output show the path to the file and the file names of the shared storage for 2 RDMs.
   
   You use the text in double quotes in some of the steps of this article.
    
3. Identify the logical device name mapped by the first RDM (the quorum disk above).
   
   #vmkfstools -q /vmfs/volumes/4d8008a2-9940968c-04df-001e4f1fbf2a/node1/quorum.vmdk
   Disk /vmfs/volumes/4d8008a2-9940968c-04df-001e4f1fbf2a/node1/quorum.vmdk is a Passthrough Raw Device Mapping
   Maps to: vml. 02000100006006016055711d00cff95e65664ee011524149442035
    
4. Identify the LUN ID (NAA ID) represented by the logical device name (prefixed with vml listed in red above)
   
   #esxcfg-scsidevs -l -d vml. 02000100006006016055711d00cff95e65664ee011524149442035 |grep Display
   Display Name: DGC Fibre Channel Disk ( naa.6006016055711d00cff95e65664ee011)
    
    
5. Using the NAA ID identified in step 3, list the current PSP used by the LUN.
   
   #esxcli nmp device list -d naa.6006016055711d00cff95e65664ee011 |grep PSP
   Path Selection Policy: VMW_PSP_RR
   
   For ESXi 5.x, the equivalent is:
   
   #esxcli storage nmp device list -d naa.6006016055711d00cff95e65664ee011 |grep PSP
   
   This output shows that the Path Selection Policy is VMW_PSP_RR
    
6. Change the policy to one relevant to the array type. This example uses MRU.
   
   In ESXi/ESX 4.1, run this command:
   
   # esxcli nmp device setpolicy -d naa.6006016055711d00cff95e65664ee011 --psp=VMW_PSP_MRU
   
   In ESXi 5.x, run this command:
   
   # esxcli storage nmp device set -d naa.6006016055711d00cff95e65664ee011 --psp=VMW_PSP_MRU
    
7. Verify that the change was successful
   
   In ESX/ESXi 4.1, run this command:
   
   # esxcli nmp device list -d naa.6006016055711d00cff95e65664ee011 |grep PSP
   naa.6006016055711d00cff95e65664ee011
   Path Selection Policy: VMW_PSP_MRU
   
   In ESXi 5.x, run this command:
   
   # esxcli storage nmp device list -d naa.6006016055711d00cff95e65664ee011 |grep PSP naa.6006016055711d00cff95e65664ee011
    
8. Repeat Steps 3 through 7 for each RDM identified in Step 2.
9. Repeat above steps for each node in the cluster on other ESXi/ESX hosts on which these nodes are running.

Additional Information

• 日本語: 異なるパス選択ポリシー (PSP) を使用するように LUN を変更する (2088815)
• 简体中文: 更改 LUN 以使用不同的路径选择策略 (PSP) (2097707)