Unable to edit Start IP or End IP Address within Network Profiles in vRealize Automation 7.x
search cancel

Unable to edit Start IP or End IP Address within Network Profiles in vRealize Automation 7.x

book

Article ID: 341828

calendar_today

Updated On:

Products

VMware Aria Suite

Issue/Introduction

Symptoms:
  • A network profile range which has IP addresses allocated cannot be edited in the vRealize Automation Administration Console.


Environment

VMware vRealize Automation 7.5.x
VMware vRealize Automation 7.4.x
VMware vRealize Automation 7.x

Resolution

This is a known issue affecting vRealize Automation 7.4 and 7.5.

This issue is resolved in vRealize Automation 7.6, available at VMware Downloads.

Workaround:
To work around this issue:
  1. Create a temporary Network Range within the same network profile.
  2. Edit the Start IP and End IP within the temporary range.
  3. While editing the temporary network range, select the network range and click Cancel.
  4. Click the range within the network you are attempting to edit.
Note: You are now able to edit the range.
  1. Remove the temporary network range.
  2. Click Save.


Powered by Wolken Software