Knowledge Base

Search the Knowledge Base:
Products:
Search In:
 

Support for NetQueue on ESX Server 3i version 3.5 Update 2

Details

NetQueue is supported on ESX Server 3i version 3.5 Update 2 using Remote Command Line Interface.
 
The following network adapters are supported:
  •  Intel 82598 10 Gigabit Ethernet Controller
  •  Neterion

Solution

Enable NetQueue in VMkernel using the VI Client as follows:

1. Log in to the VI Client.
2. Click the Configuration tab for the ESX Server host.
3. Click Advanced Settings.
4. Click VMkernel.
5. Select the checkbox for VMkernel.Boot.netNetqueueEnabled.
 
To enable NetQueue on the s2io/ixgbe modules, run the following commands:

  /usr/bin/vicfg-module -server <server> -s "intr_type=2 rx_ring_num=8" s2io
  /usr/bin/vicfg-module -server <server> -s "InterruptType=2,2 VMDQ=16,16" ixgbe

To verify that the module parameters have been applied:

1. Run the command:  /usr/bin/vicfg-module -server <server> -g s2io  OR    /usr/bin/vicfg-module -server <server> -g ixgbe
2. Reboot the ESX Server host. 

Note: The netPktHeapMinSize and netPktHeapMaxSize limits for ESX Server 3.5 Update 1 have not changed and the information in KB 1004593 is still applicable for Intel 10G network adapters.

Keywords

esx35u2i;NetQueue

Feedback

Rating: 1 - Lowest 2 3 4 5 - Highest (0 Ratings)   

Did this article help you?
This article resolved my issue.
This article did not resolve my issue.
This article helped but additional information was required to resolve my issue.
What can we do to improve this information? (2000 or fewer characters)
Submit
Rating: 1 - Lowest 2 3 4 5 - Highest (0 Ratings)   
Actions
  • KB Article: 1006272
  • Updated: Jul 31, 2008
  • Products:
    VMware ESXi
    VMware ESX
  • Product Versions:
    VMware ESXi 3.5.x Embedded
    VMware ESXi 3.5.x Installable